Hannstar J Mv-4 94V-0 Bios Reset Pro Speed Youneed

Windows and the BIOS is reporting the cpu speed as 800Mhz (never any higher)it is an AMD athlon 64 3400 capable of 2.2Ghz.

The mother board is a Hannstar J MV-4 94V-0 0443 (all I could find written on it) it has an AMI BIOS ver 08.00.11 and an SiS chip set.

The numbers at startup are 63-0100-000001-00101111-090604-sis755-258ka000-y2kc Please if you can help me find a BIOS update or another fix to get the cpu to run correctly I would be VERY grateful.015.

Hannstar J Mv-4 94V-0 Bios Reset Pro Speed Youneed

I am sorry to say but, I think your prombelm is that the cpu is the wrong size if you want it to run at that pro speed youneed to get a dual core instead a single core and update the bios then lala linda I hope this helps.

What that means is that they have not receivedtestedreleased015012an update.

This system uses a Phoenix Technologies Bios.

Most people flash to gain the use of larger hard drives although recently, many are flashing to get all the feat.

So your PC wont take the chance of that happening.

I first thought the Hard Disk is dead but its not.015012015012I contacted.

You will need to have downloaded the new bios.rom file and a small application that does the flash itself.Usually you wont ever need a.

Find the USB settings.

If USB 2.0 is listed here than your board will support it.01501201.

I have seen your message on the issue related to vertical line across the screen.

First go out to Dells website and download the latest driver for wireless device.

Its working at 3 CPU and i am reading 40C at sensor 0 and 66C at sensor 2.

Its sweating for nothing Fooling around whith the fanspeeds dousnt seem wise at this stage.

I dont know what mainboard or PLL manufacturer and type to put in the windows.

The given FSB calculations,however, do not work CPU cool states that 8 bytes were.

When the first screen appears, press F1 to enter the BIOS Setup.

On certain Compaq Presario PCs (prior to 2002) press the F10 key at the lo.